Attaching Decoration Panels - Hitachi DKC910I Installation Section

Hitachi Proprietary
Rev.3
INST(IN)10-01-10

10. Attaching Decoration Panels

When a free space is left on the front side of the rack frame, install the decoration panels there.
1. Fit the decoration panels to the front side of the rack frame one by one starting from the top.
2. The decoration panel can be installed when the two protrusions of it are aligned with the holes, which are
prepared on the rack frame with intervals of one EIA unit, and then pressed into the holes.
Figure 10-1 Attaching Decoration Panel
Decoration panel
Protrusions
DKC910I
Copyright © 2019, 2021, Hitachi, Ltd.
[INST(IN)10-01-10]