Hitachi DKC910I Installation Section page 24

Hitachi Proprietary
Rev.1
INST(IN)02-03-80
5. Connection of Rack Frames
If you install multiple rack frames, connect them.
If the connection work is not required, go to
(1) Remove the two screws from the front side of the Rack Frames to be connected and then remove
the two panels by moving them upward.
Figure 2-12 Removal of Panels
Step 8.
Rack Frame
Panel
Screw
Copyright © 2019, 2021, Hitachi, Ltd.
Panel
Panel
Front View
[INST(IN)02-03-80]
DKC910I