Hitachi DKC910I Installation Section page 192

Hitachi Proprietary
Rev.7
INST(IN)14-02-70
(3) <Backup for configuration information>
(a) The message [CNF3686i] is displayed. Select "SSVP", and then click [OK].
NOTE: When you change the IP address of Standby SVP, backup of the configuration
(b) When backup of configuration information is completed, the message [CNF3188i] is displayed.
Click [OK].
information is unnecessary. Click [Cancel]. The message [INS1105i] "This will reboot
SVP" in Step (4) is displayed.
DKC910I
Copyright © 2019, 2021, Hitachi, Ltd.
[INST(IN)14-02-70]