Hitachi DKC910I Installation Section page 85

Hitachi Proprietary
Rev.1
INST(IN)07-02-30
2. Attachment and removal of a side bezel
(1) Attaching the side bezel
When attaching the side bezel, perform the attaching in the following procedure.
(a) Attach the side bezel in the procedure  and  to cover the left side of the front side of the
Drive Box with the side bezel (L) from the top.
(b) Attach the side bezel in the procedure  and  to cover the right side of the front side of the
Drive Box with the side bezel (R) from the top.
Figure 7-7 Attaching the Side Bezels (Drive Box (SBX/UBX/NBX))
Side bezel (L)
(i) Attaching the Side Bezel (L)
(2) Removing the side bezel
When removing the side bezel, perform the removing in the following procedure.
(a) Hold the bottom of the left side bezel (L) on the front side of the Drive Box while opening
outward () and then tilt and remove (, ) the bottom of the left side bezel (L) by pulling it
toward you.
(b) Hold the bottom of the right side bezel (R) on the front side of the Drive Box while opening
outward () and then tilt and remove (, ) the bottom of the right side bezel (R) by pulling
it toward you.
Figure 7-8 Removing the Side Bezels (Drive Box (SBX/UBX/NBX))
Side bezel (L)
(i) Removing the Side Bezel (L)
Copyright © 2019, 2021, Hitachi, Ltd.
Side bezel (R)
(ii) Attaching the Side Bezel (R)
Side bezel (R)
(ii) Removing the Side Bezel (L)
DKC910I
[INST(IN)07-02-30]