Check Procedure - Hitachi DKC910I Installation Section

Hitachi Proprietary
Rev.0.1
INST(IN)14-02-230

14.2.4 Check Procedure

1. Check System Configuration
Check that the system configuration is initialized.
2. Check all MPs micro-program version
In the Version window, open the [MP Ver.(Curt./Running)] tab and the [MP Ver.(Curt./FM)] tab to check
that the error icon
To display the Version window, click [Version] in the Maintenance Utility (Sub Panel) window.
3. Delete error log
Power ON/OFF the Storage System to make sure that the Storage System starts normally (Confirm that
MESSAGE LED
Delete all error log information from the SVP and transfer the Storage System to the user (See "Log
delete" (SVP02-03-10)).
is not displayed. (See "Version of Microprogram" (SVP03-05-10).)
(LOC03-20) of the HSNPANEL is off).
DKC910I
Copyright © 2019, 2021, Hitachi, Ltd.
[INST(IN)14-02-230]