Installing Power Supply (Dbps) For Sbx/Ubx/Fbx/Nbx - Hitachi DKC910I Installation Section

Hitachi Proprietary
Rev.1
INST(IN)08-04-20

8.4.2 Installing Power Supply (DBPS) for SBX/UBX/FBX/NBX

1. With the lever completely opened, insert the Power Supply (DBPS) into the slot.
If you cannot insert the Power Supply (DBPS) into the slot easily, insert it after adjusting the position by
slightly returning the lever.
2. Push the Power Supply (DBPS) in all the way.
3. Close the lever completely to fix the Power Supply (DBPS) .
Figure 8-14 Installing Power Supply (DBPS)
DBPS1
Lever
Copyright © 2019, 2021, Hitachi, Ltd.
DBPS2
DKC910I
[INST(IN)08-04-20]