Hitachi DKC910I Installation Section page 175

Hitachi Proprietary
Rev.0
INST(IN)13-02-20
Figure 13-1 Connection of Cables
HSNBX-1
HSNBX-0
*1: Only when the SVP High Reliability Kit is installed, SSVP is installed in SSVP1 and SVP is
installed in SVP-OPTION. When the SVP High Reliability Kit is not installed, a dummy is
installed in each of SSVP1 and SVP-OPTION.
2. Removal Procedure of Maintenance PC
(1) Quit the remote desktop function, and then power off the Maintenance PC.
(2) Disconnect the power cable from the power supply.
(3) Disconnect the LAN cable from the CONSOLE port of the SSVP0 (SVP-BASIC side) or, the
CONSOLE port of SSVP1 (SVP-OPTION side).
(4) Disconnect the power cable and LAN cable from the Maintenance PC.
SVP-OPTION (*1)
SVP-BASIC
Copyright © 2019, 2021, Hitachi, Ltd.
SSVP1 (*1)
SSVP0
CONSOLE
SSVP
DKC910I
[INST(IN)13-02-20]