Hitachi DKC910I Installation Section page 149

Hitachi Proprietary
Rev.1
INST(IN)09-03-110
2. LAN cable routing procedure
• When connecting the LAN cable to SVP-BASIC or SSVP0
(1) Remove the Front Bezel from HSNBX-0 (see "How to Attach/Remove the Front Bezel"
(INST(GE)04-05-10)).
(2) Inset the LAN cable into the cable duct on the rear left side of HSNBX-0, and pull it out from the
front side.
(3) Connect the LAN cable to SVP-BASIC or SSVP0.
(4) Attach the Front Bezel to HSNBX-0 (see "How to Attach/Remove the Front Bezel"
(INST(GE)04-05-10)).
• When connecting the LAN cable to SVP-OPTION or SSVP1
(1) Remove the Front Bezel from HSNBX-1 (see "How to Attach/Remove the Front Bezel"
(INST(GE)04-05-10)).
(2) Inset the LAN cable into the cable duct on the rear left side of HSNBX-1, and pull it out from the
front side.
(3) Connect the LAN cable to SVP-OPTION or SSVP1.
(4) Attach the Front Bezel to HSNBX-1 (see "How to Attach/Remove the Front Bezel"
(INST(GE)04-05-10)).
Figure 9-32 External LAN Cable Routing
HSNBX-1
SVP-OPTION
SVP-BASIC
HSNBX-0
HSNBX
SVP
Front view
SSVP1
SSVP0
PUBLIC
CONSOLE
INTERNAL
SSVP
Cable duct
Front view
Cable duct
LAN
cable
Rear view
LAN
cable
DKC910I
Copyright © 2019, 2021, Hitachi, Ltd.
[INST(IN)09-03-110]