Configuration For Testing At Command Testing With External Mcu; Figure 10: Da16600 Evb Configuration For At-Cmd Over Uart To Ft2232H; Figure 11: Da16200 Evb Configuration For At-Cmd Over Uart/Spi To External Mcu; Table 11: Da16600 Evb Switch Configuration For At-Cmd Over Uart Of Ft2232H - Renesas FreeRTOS DA16200 User Manual

UM-WI-056
DA16200 DA16600 FreeRTOS Getting Started Guide

Figure 10: DA16600 EVB Configuration for AT-CMD over UART to FT2232H

Table 11: DA16600 EVB Switch Configuration for AT-CMD over UART of FT2232H

SW3 SW4 SW5 SW6 SW7 SW8 SW9 SW10
All ON All OFF All ON All OFF All OFF All ON All OFF All OFF
See Ref . [5] f or f urther steps.
4.7.2

Configuration for Testing AT Command Testing with External MCU

Both the DA16200 and DA16600 EVBs have external pins which allows users to test AT Command
over the UART or SPI interf ace using an external MCU.
Figure 11, Table 12 and Table 13 show how to conf igure the DA16200 EVB f or AT Command
processing over the UART or SPI interf ace using an external MCU. This conf iguration connects
UART1 or SPI of the DA16200 (GPIOA4/5 f or UART or GPIOA2/3/8/9 f or SPI) to the external pin out
connectors.

Figure 11: DA16200 EVB Configuration for AT-CMD over UART/SPI to External MCU

User Manual Revision 1.8 Aug. 18, 2023
CFR0012 31 of 106 © 2023 Renesas Electronics