Designating The Positioning Address - Mitsubishi Electric MELSEC Q Series User Manual

8 POSITIONING CONTROL

8.1.3 Designating the positioning address

There are two methods (absolute system and incremental system) to design a
position in the positioning control. Each method can be set in "
(1) Absolute system
Positioning can be executed by specifing a position (absolute address) based on
the home position.
Address 100
Address 150
Address 300
Address 150
0
(2) Incremental system
Positioning can be executed by specifing a movement direction and movement
amount based on the position that has currently stopped.
Movement amount
+100
0
Address 100
Address 150
100 150
Movement amount
+100
Movement amount -200
Movement amount -150
100 150
8 - 5
MELSEC-Q
Control system".
Da.1
Start point
End point
300
Start point
End point
250 300