Mitsubishi Electric MELSEC Q Series User Manual page 61

4 INSTALLATION, WIRING, START-UP, AND MAINTENANCE
Use the processing method and the processing treatment device that exists in the connector when
you fix the cord part of the SSCNET cable to the connector.
It must not cut squarely when you cut the cord part of the SSCNET cable, the cutting edge side
must not be made smooth, and garbage etc. must not adhere.
The damage etc. must not adhere to the optical cord part when you peel off the film of the cable of
the SSCNET cable.
If the end face of cord tip for the SSCNET cable is dirty, optical transmission is interrupted and it
may cause malfunctions. If it becomes dirty, wipe with a bonded textile, etc. Do not use solvent such
as alcohol.
Please do not add impossible power to the connector of the SSCNET cable.
When incinerating the SSCNET cable (optical fiber), hydrogen fluoride gas or hydrogen chloride
gas which is corrosive and harmful may be generated. For disposal of the SSCNET cable (optical
fiber), request for specialized industrial waste disposal services who has incineration facility for
disposing hydrogen fluoride gas or hydrogen chloride gas.
CAUTION
1) MR-J3BUS M
a) Model explanation
Type: MR-J3BUS M-
4 - 12
Symbol Cable type
None Standard cord for inside panel
A Standard cable for outside panel
B Long distance cable
Symbol Cable length [m(ft.)]
015 0.15(0.49)
03 0.3(0.98)
05 0.5(1.64)
1 1(3.28)
3 3(9.84)
5 5(16.40)
10 10(32.81)
20 20(65.62)
30 30(98.43)
40 40(131.23)
50 50(164.04)
MELSEC-Q