Mitsubishi Electric MELSEC Q Series User Manual page 79

5 SPECIFICATIONS AND FUNCTIONS
Functions
Target position change function
Current value change function
External signal logic selection
Operation setting for incompletion
of OPR function
Axis error reset
Absolute position system
Flash ROM write function
Parameter initialization function
This function changes the target position during positioning operation.
This function changes the feed current value to any address.
This function selects a logic of I/O signals.
This function selects whether the positioning control is started or not at the
incompletion of OPR.
This function resets the errors occurred.
This function restores the absolute position.
This function writes (back-up) the parameter data and positioning data in the
flash ROM.
This function returns the parameters and positioning data stored in the QD74MH
buffer memory and flash ROM to the default values (shipped from the factory).
5 - 6
Details
MELSEC-Q
Reference
section
10.16
10.17
10.18
10.19
10.20
10.21
10.22
10.23