Data Used For Control - Mitsubishi Electric MELSEC Q Series User Manual

10 FUNCTION DETAILS

10.23.2 Data used for control

Symbol
Control data Cd.101 Parameter initialization request
Symbol
Monitor data Md.102
Set the following control data for the parameter initialization function.
Refer to Section 6.3 to 6.8 for the buffer memory address and details.
Item
Number of write accesses to flash ROM by the parameter initialization function is
stored in the following buffer memory.
Refer to the Section 6.3 to 6.8 for the buffer memory address and monitoring details.
Item
Number of write accesses to flash
ROM
Execute the parameter initialization request stored in the flash ROM
Number of write accesses to flash ROM and the number of parameter
initializations after the system power supply ON can be stored.
10 - 45
MELSEC-Q
Details
Details