Mitsubishi Electric MELSEC Q Series User Manual page 62

4 INSTALLATION, WIRING, START-UP, AND MAINTENANCE
Protective tube
Protective tube
(Note)
Protective tube
(Note)
b) Exterior dimensions
• MR-J3BUS015M
15
6.7(0.26)
(0.59)
• MR-J3BUS03M to MR-J3BUS3M
Refer to the table of this section (5) for cable length (L).
100
(3.94)
• MR-J3BUS5M-A to MR-J3BUS20M-A, MR-J3BUS30M-B to
MR-J3BUS50M-B
Refer to the table of this section (5) for cable length (L).
MR-J3BUS5M-A to MR-J3BUS20M-A
MR-J3BUS30M-B to MR-J3BUS50M-B
(A)
(B)
POINT
Keep the cap and the tube for protecting light code end of SSCNET cable in a
plastic bag with a zipper of SSCNET cable to prevent them from becoming dirty.
13.4
(0.53)
150
(5.91)
L
(Note) : Dimension of connector part is the same as that of MR-J3BUS015M.
SSCNET cable
(B)
L
(Note) : Dimension of connector part is the same as that of MR-J3BUS015M.
4 - 13
37.65
(1.48)
+50
- 0
100
(3.94)
Variation [mm(inch)]
A
100(3.94)
150(5.91)
(A)
MELSEC-Q
[Unit: mm(inch)]
[Unit: mm(inch)]
B
30(1.18)
50(1.97)
[Unit: mm(inch)]