Status Indicators - Agilent Technologies Infinity II 1290 User Manual

3
Using the Pump

Status Indicators

Status Indicators

34
The module status indicator indicates one of six possible module
conditions:
Status indicators
1. Idle
2. Run mode
3. Not- ready. Waiting for a specific pre- run condition to be reached or
completed.
4. Error mode - interrupts the analysis and requires attention
(for example a leak or defective internal components).
5. Resident mode (blinking) - for example during update of main
firmware.
6. Bootloader mode (fast blinking). Try to re- boot the module or try a
cold- start. Then try a firmware update.
Agilent 1290 Infinity II Flexible Pump User Manual