4 The Error means the MAC address has not been assigned an IP address
5 Close the log file before turning on another instrument.
6 Uncheck the Do you want to log BootP requests? box after configuring
Adding each instrument to the network using BootP
1 Follow Start > All Programs > Agilent BootP Service and select Edit BootP
2 Uncheck the Do you want to log BootP requests? once all instruments have
3 Click Edit BootP Addresses... The Edit BootP Addresses screen appears.
4 Click Add... The Add BootP Entry screen appears.
Agilent 1290 Infinity II Flexible Pump User Manual
and the Tab File does not have this entry. The MAC address is saved to
the Tab File when an IP address is assigned.
instruments to avoid having the logfile use up excessive disk space.
Settings. The BootP Settings screen appears.
been added.
The Do you want to log BootP requests? box must be unchecked when you
have finished configuring instruments; otherwise, the log file will
quickly fill up disk space.
Figure 34
Enable BootP logging
LAN Configuration
Automatic configuration with Bootp
11
207