Quaternary Pump Shutdown During Analysis; Reading The Pump Encoder Tag Failed - Agilent Technologies Infinity II 1290 User Manual

Quaternary pump shutdown during analysis

Error ID: 29199
The quaternary pump has been shut down by the control software or
control module during an analysis.
• Parameter: 0 for off, 1 for standby.
Probable cause
1

Reading the pump encoder tag failed

Error ID: 29201
Reading the pump encoder tag has failed.
• Parameter: 1 – 2 referring to pump drive
Probable cause
1
2
Agilent 1290 Infinity II Flexible Pump User Manual
Pump has been shut down.
Defect connection between encoder and
main board.
Missing or defect tag Defect connection
between tag and encoder.
Error Information
Pump Error Messages
Suggested actions
Restart pump.
Suggested actions
Please contact your Agilent service
representative.
Please contact your Agilent service
representative.
6
63