Agilent Technologies Infinity II 1290 User Manual page 213

3 Type
Table 16
Value
?
/
ip <x.x.x.x>
sm <x.x.x.x>
gw <x.x.x.x>
exit
4 To change a parameter follows the style:
5 Use the "/" and press Enter to list the current settings.
Agilent 1290 Infinity II Flexible Pump User Manual
? and press enter to see the available commands.
Figure 40 Telnet Commands
Telnet Commands
• parameter value, for example:
ip 134.40.27.230
Then press [Enter], where parameter refers to the configuration
parameter you are defining, and value refers to the definitions you are
assigning to that parameter. Each parameter entry is followed by a
carriage return.
Description
displays syntax and descriptions of commands
displays current LAN settings
sets new ip address
sets new subnet mask
sets new default gateway
exits shell and saves all changes
LAN Configuration
Manual Configuration
11
213