Waste Counter Limit Exceeded; Flow Rate Limit Exceeded - Agilent Technologies Infinity II 1290 User Manual

6
Error Information
Pump Error Messages

Waste counter limit exceeded

Error ID: 29147
The counter for the waste volume has exceeded the limit, which has been
set in the user interface.
• Parameter: None
Probable cause
1
2

Flow rate limit exceeded

Error ID: 29164
The flow rate of the quaternary pump has exceeded the limit, while the
pump runs in pressure controlled mode, e.g. during a pressure test.
• Parameter: None
Probable cause
1
2
3
4
62
The waste container is full.
Inappropriate setting for waste counter.
Leak
Bottle empty.
Shutoff valve closed (if applicable).
Drift of pressure sensor (unlikely for short
tests taking some minutes).
Suggested actions
Empty waste container.
• Reset waste counter.
• Adjust waste counter limit.
Suggested actions
Check for leaks in the pump and flow path.
Fill solvent bottle.
Open shutoff valve.
Replace pressure sensor.
Agilent 1290 Infinity II Flexible Pump User Manual