Two Methods To Determine The Mac Address - Agilent Technologies Infinity II 1290 User Manual

Two Methods to Determine the MAC Address

Enabling logging to discover the MAC address using BootP
If you want to see the MAC address, select the Do you want to log BootP
requests? check box.
1 Open BootP Settings from Start > All Programs > Agilent BootP Service >
2 In BootP Settings... check Do you want to log BootP requests? to enable logging.
3 Click OK to save the values or Cancel to discard them. The editing ends.
4 After each modification of the BootP settings (i.e. EditBootPSettings) a
5 Uncheck the Do you want to log BootP requests? box after configuring
Agilent 1290 Infinity II Flexible Pump User Manual
EditBootPSettings.
Figure 33 Enable BootP logging
The log file is located in
C:\Documents and Settings\All Users\Application Data\Agilent\BootP\LogFile
It contains a MAC address entry for each device that requests
configuration information from BootP.
stop or start of the BootP service is required for the BootP service to
accept changes. See
or "Restarting the Agilent BootP Service"
instruments; otherwise, the log file will quickly fill up disk space.
Automatic configuration with Bootp
"Stopping the Agilent BootP Service"
LAN Configuration
on page 209
on page 210.
11
205