Changing The Ip Address Of An Instrument Using The Agilent Bootp Service - Agilent Technologies Infinity II 1290 User Manual

Changing the IP Address of an Instrument Using the Agilent BootP
Service
Agilent BootP Service starts automatically when your PC reboots. To
change Agilent BootP Service settings, you must stop the service, make the
changes, and then restart the service.
Stopping the Agilent BootP Service
1 From the Windows control panel, select Administrative Tools > Services. The
2 Right- click Agilent BootP Service.
3 Select Stop.
4 Close the Services and Administrative Tools screen.
Editing the IP address and other parameters in EditBootPSettings
1 Select Start > All Programs > Agilent BootP Service and select Edit BootP
2 When the BootP Settings screen is first opened, it shows the default
Agilent 1290 Infinity II Flexible Pump User Manual
Services screen appears.
Figure 35 Windows Services screen
Settings. The BootP Settings screen appears.
settings from installation.
LAN Configuration
Automatic configuration with Bootp
11
209