Agilent Technologies Infinity II 1290 User Manual page 29

Table 2
Feature
Solvent selection
valve
Degassing unit
Materials in contact
with solvent
Automatic Purge
Valve
Active Seal wash
Intelligent System
Emulation
Technology (ISET)
Communications
Safety and
maintenance
GLP features
Housing
Agilent 1290 Infinity II Flexible Pump User Manual
Agilent 1290 Infinity II Flexible Pump (G7104A) Performance Specifications
Specification
Internal 4-solvent gradient formation valve included.
External 2x 12 solvent valve as option, fully integrated in the pump control
interface.
Integrated.
Number of channels: 4, Internal volume per channel: 1.5 mL
TFE/PDD copolymer, FEP, PEEK, PPS, stainless steel, polyimide
Included, allows automatic inline-filter back-flush and automatic mixer
change, e.g. for optional TFA-mixer
Included
Included
Controller-area network (CAN), RS232C, APG remote: ready, start, stop and
shutdown signals, LAN
Extensive diagnostics, error detection and display through included
Agilent LabAdvisor, leak detection, safe leak handling, leak output signal
for shutdown of the pumping system. Low voltage in major maintenance
areas.
Early maintenance feedback (EMF) for continuous tracking of instrument
usage in terms of seal wear and volume of pumped mobile phase with
pre-defined and user settable limits and feedback messages. Electronic
records of maintenance and errors.
All materials are recyclable.
Site Requirements and Specifications
Performance Specifications
2
29