Status Indicators - Agilent Technologies 1290 Infinity User Manual
Quaternary pump
Hide thumbs
Also See for 1290 Infinity:
- User manual (302 pages) ,
- Technical note (100 pages) ,
- Manual (16 pages)
Table of Contents
Advertisement
4
Using the Module
Status Indicators
Status Indicators
1 The module status indicator indicates one of six possible module
54
conditions:
Status indicators
1. Idle
2. Run mode
3. Not-ready. Waiting for a specific pre-run condition to be reached or
completed.
4. Error mode - interrupts the analysis and requires attention (for example
a leak or defective internal components).
5. Resident mode (blinking) - for example during update of main firmware.
6. Bootloader mode (fast blinking). Try to re-boot the module or try a
cold-start. Then try a firmware update.
1290 Infinity Quaternary Pump User Manual
Advertisement
Chapters
Table of Contents
