Status Indicators - Agilent Technologies 1290 Infinity II User Manual

Status Indicators

1 The module status indicator indicates one of six possible module
1290 Infinity II High Speed Pump User Manual
conditions:

Status indicators

1. Idle
2. Run mode
3. Not-ready. Waiting for a specific pre-run condition to be reached or
completed.
4. Error mode - interrupts the analysis and requires attention (for example
a leak or defective internal components).
5. Resident mode (blinking) - for example during update of main firmware.
6. Bootloader mode (fast blinking). Try to re-boot the module or try a
cold-start. Then try a firmware update.
3
Using the Pump
Status Indicators
31