What You Have To Do First - Agilent Technologies Infinity II 1290 User Manual

11
LAN Configuration

What You Have To Do First

What You Have To Do First

The module has an on- board LAN communication interface.
1 Note the MAC (Media Access Control) address for further reference. The
2 Connect the instrument's LAN interface (see
190
MAC or hardware address of the LAN interfaces is a world wide unique
identifier. No other network device will have the same hardware
address. The MAC address can be found on a label at the rear of the
module underneath the configuration switch (see
page 190).
Figure 23 MAC label
•
the PC network card using a crossover network cable (point- to- point)
or
•
a hub or switch using a standard LAN cable.
Figure 24 Location of LAN interfaces and MAC label
Part number of the pump main board
Revision code, vendor, year and week of assembly
MAC address
Country of origin
Figure 24
Agilent 1290 Infinity II Flexible Pump User Manual
Figure 24 on
on page 190) to