Status Indicators - Agilent Technologies Infinity II SFC Binary 1260 User Manual

3
Using the Pump

Status Indicators

Status Indicators

1 The module status indicator indicates one of six possible module
34
conditions:
Status indicators
1. Idle
2. Run mode
3. Not-ready. Waiting for a specific pre-run condition to be reached or
completed.
4. Error mode - interrupts the analysis and requires attention (for example
a leak or defective internal components).
5. Resident mode (blinking) - for example during update of main firmware.
6. Bootloader mode (fast blinking). Try to re-boot the module or try a
cold-start. Then try a firmware update.
1260 SFC Binary Pump