Figure 104: Disconnecting The Ac Power Cord From The Chassis; Figure 105: Lifting The Locking Handle On The Sbxpwrsys2 Ac Power Supply - Allied Telesis SwitchBlade x908 GEN2 Installation Manual

2. Move the retaining clip from the power cord on the rear panel of the
chassis, and disconnect the cord. Refer to Figure 104.
Figure 104. Disconnecting the AC Power Cord from the Chassis
3. Lift the locking hand on the power supply. Refer to Figure 105 on page
147.
Figure 105. Lifting the Locking Handle on the SBxPWRSYS2 AC Power
4. Carefully pull on the locking handle to slide the power supply from the
chassis. Refer to Figure 106 on page 148.
SBx908 GEN2 Installation Guide for Stand-alone Switches
Supply
147