Figure 124: Aligning The Fan08 Module In The Chassis Slot; Figure 125: Seating The Fan08 Module On The Connector In The Chassis - Allied Telesis SwitchBlade x908 GEN2 Installation Manual

SBx908 GEN2 Installation Guide for Stand-alone Switches
Figure 124. Aligning the FAN08 Module in the Chassis Slot
2. When you feel the module make contact with the connector inside the
chassis, gently press on both sides to seat the module on the
connector. Refer to Figure 125.
Figure 125. Seating the FAN08 Module on the Connector in the Chassis
169