Figure 101: Installing Sp10Tw Cables In The Xem2-12Xs Line Card; Figure 102: Sliding The Qsfpcu Cable Into The Slot - Allied Telesis SwitchBlade x908 GEN2 Installation Manual

Chapter 6: Cabling the Networking Ports
Release Tab
142
Figure 101. Installing SP10TW Cables in the XEM2-12XS Line Card

XEM2-4QS Line Card - Orient the connector on the QSFPCU
Cable with the release tab on the left side and slide it into the slot
until it clicks into place. Refer to Figure 102.
Figure 102. Sliding the QSFPCU Cable into the Slot
5. Connect the other end of the cable into a compatible slot on another
network device.
Release Tab