SBx908 GEN2 Installation Guide for Stand-alone Switches
Adjusting the Equipment Rack Brackets
The chassis comes with two pre-installed equipment rack brackets. The
default positions of the brackets align the front of the chassis with the front
of the equipment rack. You can re-position the brackets on the sides of the
chassis to have the device extend in front of the rack. Figure 24 here and
Figure 25 on page 64 and Figure 26 on page 65 show the various bracket
and chassis orientations. The first illustration in Figure 24 shows the
default positions of the brackets.
Figure 24. Chassis Orientations in the Equipment Rack
63