Figure 20: Pre-Installed Items On The Rear Panel - Allied Telesis SwitchBlade x908 GEN2 Installation Manual

1. One ground wire lug
Note
You should retain the original packaging material in the event you
need to return the unit to Allied Telesis.
Note
The product does not come with power supplies. Power supplies
must be ordered separately.
5. Remove the accessory kit from the shipping box and verify its
components, listed in Figure 21 on page 58.
2
1
Figure 20. Pre-installed Items on the Rear Panel
SBx908 GEN2 Installation Guide for Stand-alone Switches
2
2. Two AT-FAN08 Fan
Modules
57