Table of Contents
Advertisement
Management
Methods
Management
Panel
Power Supplies
Web browser interface available remotely over the network.
The AlliedWare Plus management software comes pre-installed on the
chassis.
You can manage the switch as follows:
Command line interface accessed locally through the Console port
or remotely using Telnet or Secure Shell.
Web browser interface accessed remotely using HTTP.
Remote access of SNMPv1, v2c, or v3.
The pre-installed management panel has the following features:
Console RS-232 port for local management (no IP address
required),
USB 2.0 port for storing backup copies of system configuration
files, transferring management software among units, and other
management functions.
An eco-friendly button for turning off the system LEDs to reduce
power consumption.
Network management port for initial configuration and
maintenance access to the chassis.
Chassis reset button.
The chassis has slots for two power supplies. A single power supply can
support a full chassis. Adding a second power supply provides power
redundancy. Power supplies are ordered separately. Refer to "Power
Supplies" on page 41.
x908 GEN2 Installation Guide for Stand-alone Switches
19
Advertisement
Table of Contents
