Figure 62: Attaching The Grounding Lug And Wire To The Grounding Post - Allied Telesis SwitchBlade x908 GEN2 Installation Manual

SBx908 GEN2 Installation Guide for Stand-alone Switches
Figure 62. Attaching the Grounding Lug and Wire to the Grounding Post
6. Secure the grounding wire with the nut and washer removed in step 4,
with an 8 mm wrench. Refer to Figure 63 on page 100.
Allied Telesis recommends tightening the nut and washer to 26 inch-
lbs.
99