Broadcast Suppression Screen - Cabletron Systems 2208 User Manual

Chapter 5: Local Management
5.16

BROADCAST SUPPRESSION SCREEN

The Broadcast Suppression screen,
desired limit of receive broadcast frames that are switched out to the other
interfaces.
The Broadcast Suppression screen will not be available if the
NOTES
operational mode of the device has been set to SECURE FAST
VLAN. This screen may only be used by devices configured to
operate as traditional or 802.1Q switches.
Broadcast frames received above the threshold setting are
dropped.
To access the Broadcast Suppression screen from the Device Specific
Configuration menu screen, use the arrow keys to highlight the
BROADCAST SUPPRESSION menu item and press ENTER. The
Broadcast Suppression screen displays.
Event Message Line
Device Type: 2H22-08R
PORT #
Total RX
1
12345678910
2
12345678910
3
12345678910
4
12345678910
5
12345678910
6
12345678910
7
12345678910
8
12345678910
SAVE
Figure 5-23 Broadcast Suppression Screen
Page 5-62
Figure
2H22-08R LOCAL MANAGEMENT
Broadcast Suppression
Peak Rate Time Since Peak
150000 999:23:59
150000 999:23:59
150000 999:23:59
150000 999:23:59
150000 999:23:59
150000 999:23:59
150000 999:23:59
150000 999:23:59
2H22-08R SmartSwitch 2208 User's Guide
5-23, allows you to set a
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Threshold Reset Peak
150000 [NO]
150000 [NO]
150000 [NO]
150000 [NO]
150000 [NO]
150000 [NO]
150000 [NO]
150000 [NO]
EXIT
XX.XX.XX
RETURN
2159-25