System Resources Screen - Cabletron Systems 2208 User Manual

Chapter 5: Local Management
5.13

SYSTEM RESOURCES SCREEN

The System Resources screen,
concerning the processor used in the 2H22-08R and the amount of
FLASH memory, DRAM, and NVRAM that is installed and how much of
that memory is available. This screen also allows you to monitor the
current processor (switch) utilization and the peak switch utilization.
To access the System Resources screen from the Device Specific
Configuration Menu screen, use the arrow keys to highlight the SYSTEM
RESOURCES menu item and press ENTER. The System Resources
screen displays.
Event Message Line
Device Type: 2H22-08R
Flash Memory Installed : X MB
DRAM Installed:
NVRAM Installed:
SAVE
The following briefly explains each field on the System Resources screen.
CPU Type (Read-only)
Indicates the microprocessor used in the 2H22-08R.
Page 5-50
Figure
2H22-08R LOCAL MANAGEMENT
System Resources
CPU Type:
XX MB
XX KB
Current Switch Utilization: 66%
Peak Switch Utilization: 75%
Reset Peak Switch Utilization: [NO]
Figure 5-20 System Resources Screen
2H22-08R SmartSwitch 2208 User's Guide
5-20, provides information
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
i960 HT 25Mhz
Available:
Available:
Available:
EXIT
XX.XX.XX
XXXXX Bytes
XXXXX Bytes
XXXXX Bytes
RETURN
RETURN
2159-40