Chapter 2 Network Requirements; Smarttrunk; 10Base-T Network - Cabletron Systems 2208 User Manual

Before installing the 2H22-08R or Fast Ethernet Interface Module(s)
(FE-100TX, FE-100FX, or FE-100F3) in your network, review the
requirements and specifications referred to in this chapter to ensure
satisfactory equipment performance. Failure to follow these guidelines
may produce poor network performance.
The Cabletron Systems Cabling Guide and SmartTrunk User's
NOTE
Guide, referred to in the following sections, are found on the
Cabletron Systems World Wide Web site:
http://www.cabletron.com/
2.1

SmartTrunk

To connect the 2H22-08R to a network so it can take advantage of the
SmartTrunk feature, there are certain rules concerning port connections
and configurations that must be followed for proper operation. Refer to
the Cabletron Systems SmartTrunk User's Guide for additional
information.
2.2

10BASE-T NETWORK

When connecting a 10BASE-T segment to any of the 2H22-08R ports
(Interfaces 1 through 8), ensure that the network meets the Ethernet
network requirements of the IEEE 802.3 standard for 10BASE-T. Refer to
the Cabletron Systems Cabling Guide for details.
2H22-08R SmartSwitch 2208 User's Guide
CHAPTER 2
NETWORK REQUIREMENTS
Page 2-1