Console Cable Connection - Cabletron Systems 2208 User Manual

Chapter 5: Local Management
5.3.1

Console Cable Connection

Use the Console Cable Kit provided with the 2H22-08R to attach the
management terminal to the 2H22-08R COM port as shown in
Connect an IBM VT terminal device, running the VT terminal emulation,
to the 2H22-08R as follows:
1. Connect the RJ45 connector at one end of the cable (supplied in the
kit) to the COM port on the 2H22-08R.
2. Plug the RJ45 connector at the other end of the cable into the
RJ45-to-DB9 adapter (supplied in the kit).
3. Connect the RJ45-to-DB9 adapter to the communications port on
the PC.
Figure 5-1 Management Terminal Connection (PC Connection)
Page 5-4
PWR
CPU
2H22-08R
RESET
1 2 3 4 5 6
COM
PC
2H22-08R SmartSwitch 2208 User's Guide
RJ45 COM Port
1X 2X 3X 4X 5X 6X
with RJ45 Connectors
RJ45-to-DB9
PC Adapter
Figure
7
8
UTP Cable
5-1.