Management Terminal Setup
5.3.4
Telnet Connections
Once the 2H22-08R has a valid IP address, you can establish a Telnet
session with Local Management from any TCP/IP based node on the
network. Telnet connections to the 2H22-08R require the Community
Name passwords assigned at the SNMP Community Names screen of the
2H22-08R.
For information about setting the IP address, refer to
Section
5.7.
For information about assigning Community Names, refer to
Section
5.8.
Refer to the instructions included with the Telnet application for
information about establishing a Telnet session.
2H22-08R SmartSwitch 2208 User's Guide
Page 5-7