Switch Configuration Screen - Cabletron Systems 2208 User Manual

Exiting without saving causes a "NOT SAVED?" message to
NOTE
appear above the SAVE command. Edits are lost if they are not
saved before exiting.
The designated workstations now receive traps from the 2H22-08R.
5.10

SWITCH CONFIGURATION SCREEN

The Switch Configuration Screen will not be available if the
NOTE
operational mode of the device has been set to SECURE FAST
VLAN. This screen may only be used by devices configured to
operate as 802.1D or 802.1Q switches.
The Switch Configuration screen,
options to make a switch operational in your network.
To access the Switch Configuration screen from the Device Configuration
Menu screen, use the arrow keys to highlight the SWITCH
CONFIGURATION menu item and press ENTER. The Switch
Configuration screen displays showing Ports 1 through 8.
2H22-08R SmartSwitch 2208 User's Guide
Switch Configuration Screen
Figure 5-17, provides the basic setup
Page 5-37