Table of Contents
Advertisement
new settings and updates the Source Port and Destination Port
read-only fields.
5.16
BROADCAST SUPPRESSION SCREEN
The Broadcast Suppression screen,
desired limit of receive broadcast frames per port per second.
The Broadcast Suppression screen will not be available if the
NOTE
operational mode of the device has been set to SECURE FAST
VLAN or 802.1Q SWITCHING. Refer to your Release Notes to
see what operational modes support Broadcast Suppression.
Refer to
operational mode of the module.
Any broadcast frames received above the threshold setting are
dropped.
2H28-08R SmartSwitch 2208 User's Guide
Section 5.7.9
for instructions on configuring the
Broadcast Suppression Screen
Figure
5-22, allows the user to set a
5-57
Advertisement
Table of Contents
Troubleshooting
