The following explains each SNMP Community Names screen field:
Community Name (Modifiable)
Displays the user-defined name through which a user accesses the
2H22-08R SNMP Management. Any Community Name assigned here
acts as a password to Local/Remote Management. To enter a community
name, refer to
Section
Access Policy (Read-Only)
Indicates the access accorded each Community Name. The available
access levels are as follows:
read-only
read-write
super-user
5.8.1
Establishing Community Names
The password used to access Local Management on the Password Screen
must have super-user access to view and edit the SNMP Community
Names screen. Using a password with read-only or read-write access does
not allow a user to view or edit the SNMP Community Names screen.
Any community name assigned in the SNMP Community
NOTE
Names screen is a password to its corresponding level of
access to Local Management. The community name assigned
super-user access is the only one that gives the user complete
access to Local Management.
2H22-08R SmartSwitch 2208 User's Guide
SNMP Community Names Screen
5.8.1.
This Community Name gives you read-only
access to the 2H22-08R MIB objects, and
excludes access to security-protected fields of
read-write or super-user authorization.
This Community Name gives you read-write
access to the 2H22-08R MIB objects, excluding
security protected fields for Super-User access
only.
This Community Name gives you read-write
access to the 2H22-08R MIB objects and
allows you to change all modifiable parameters
including community names, IP addresses,
traps, and SNMP objects.
Page 5-33