Cabletron Systems 2208 User Manual page 31

8
Figure 3-2 Attaching the Strain-Relief Bracket
Rack Mounting the 2H22-08R
Proceed as follows to install the 2H22-08R into a 19-inch rack.
1. Remove and discard the four cover screws (two from each side)
located along the front edges of each side of the 2H22-08R.
2. Locate the four 6-32 x 3/8-inch flathead cover replacement screws in
the rackmount kit. Use these screws to attach the rackmount brackets
to the 2H22-08R as shown in
2H22-08R RESET
Figure 3-3 Installing the Rackmount Brackets
3. With the mounting brackets installed, position the 2H22-08R between
the vertical frame members of the 19-inch rack and fasten it securely
with user supplied mounting screws as shown in
2H22-08R SmartSwitch 2208 User's Guide
Screws (4)
Strain-Relief Bracket
7 6X 5X 4X
Rackmount Brackets (2)
PWR
CPU
1 2 3 4 5 6
COM 1X 2X
3X 2X 1X
6 5 4 3 2 1
Figure 3-3.
7
3X 4X 5X 6X
Screws (4)
Installing the 2H22-08R
COM
2H22-08R
RESET
CPU
PWR
8
Figure 3-4.
2251-47
2251-04
Page 3-5