Setting The Reset Peak - Cabletron Systems 2208 User Manual

Chapter 5: Local Management

5.16.2 Setting the Reset Peak

To set the Reset Peak field to YES or NO, proceed as follows:
1. Use the arrow keys to highlight the Reset Peak field for the selected
port.
2. Press the SPACE bar to select YES or NO.
3. Use the arrows keys to highlight the SAVE command at the bottom of
the screen.
4. Press ENTER. The message "SAVED OK" displays and the Time
Since Peak field is also reset.
Page 5-64 2H22-08R SmartSwitch 2208 User's Guide