link_trap:
Syntax:
Description:
Options:
Example:
2H22-08R SmartSwitch 2208 User's Guide
link_trap [enable/disable/status] [PORT/all]
The link_trap command allows link traps to be
enabled or disabled when specifying a single
port, or simultaneously when specifying "all"
or no ports. When one or all ports are specified
to enable, disable or find their status, their
current condition is displayed.
Not Applicable
-> link_trap status 3
Link traps are ENABLED on port 3
-> link_trap disable all
Link traps have been DISABLED on all ports (1 through 8)
Network Tools
2364_lnktrp
Page 5-91