Setting The Flow Control Admin Status - Cabletron Systems 2208 User Manual

5.11.6 Setting the Flow Control Admin Status

This field toggles between ENABLED and DISABLED. To enable or
disable Flow Control, do the following:
1. Use the arrow keys to highlight the Flow Control Admin Status field.
2. Use the SPACE bar to toggle the field to the desired setting. Press
ENTER.
3. Use the arrow keys to highlight the SAVE command. Press ENTER.
The message "SAVED OK" displays and Local Management saves
the changes to memory.
2H22-08R SmartSwitch 2208 User's Guide
Ethernet Interface Configuration
Page 5-47