Cabletron Systems 2208 User Manual page 130

Chapter 5: Local Management
ping:
Syntax:
Description:
Options:
Example:
reset:
Syntax:
Description:
The Network Tools connection to the device will be terminated
upon execution of this command.
TIP
Options:
Example:
Page 5-86
ping [IP address]
The ping command generates an outbound ping
request to check the status (alive/not alive) of a
device at a specified IP address.
[IP address]
-> ping 122.144.40.10
122.144.40.10 is alive
reset
This reset command initiates a hardware reset
of the device. The reset command initializes the
CPU processor, runs the onboard diagnostics,
and restarts the software image, which restores
your configuration settings from NVRAM. You
are queried to confirm the reset command to
ensure against unwanted resets.
Not Applicable
-> reset
2H22-08R SmartSwitch 2208 User's Guide
05141-71
17421-45