Broadcast Suppression Screen - Cabletron Systems 2H23-50R User Manual

5.16

BROADCAST SUPPRESSION SCREEN

The Broadcast Suppression screen,
desired limit of receive broadcast frames that are switched out to the other
Network, Fast Ethernet, or HSIM ports.
The Broadcast Suppression screen is not available if the
NOTE
operational mode of the device is set to SECURE FAST VLAN.
This screen may only be used when the device is configured to
operate as an 802.1D or 802.1Q switch.
Broadcast frames received above the threshold setting are
dropped.
To access the Broadcast Suppression screen from the Device Specific
Configuration Menu screen, use the arrow keys to highlight the
BROADCAST SUPPRESSION menu item and press ENTER. The
Broadcast Suppression screen displays.
Event Message Line
Device Type: 2H23-50R
PORT # Total RX
1 12345678910
2 12345678910
3 12345678910
4 12345678910
5 12345678910
6 12345678910
7 12345678910
8 12345678910
9 12345678910
10 12345678910
SAVE
Figure 5-23 Broadcast Suppression Screen
2H23-50R/2H33-37R User's Guide
Figure
2H23-50R LOCAL MANAGEMENT
Broadcast Suppression
Peak Rate Time Since Peak
150000 999:23:59
150000 999:23:59
150000 999:23:59
150000 999:23:59
150000 999:23:59
150000 999:23:59
150000 999:23:59
150000 999:23:59
150000 999:23:59
150000 999:23:59
EXIT
Broadcast Suppression Screen
5-23, enables the user to set a
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Threshold
150000
150000
150000
150000
150000
150000
150000
150000
150000
150000
XX.XX.XX
Reset Peak
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
RETURN
RETURN
22861-56
5-61