Setting The Subnet Mask - Cabletron Systems 2208 User Manual

Chapter 5: Local Management
YOU HAVE ELECTED TO SAVE ONE OR MORE CONFIGURATION
ITEMS THAT REQUIRE RESETTING THIS DEVICE.
ARE YOU SURE YOU WANT TO CONTINUE?
5. Use the arrow keys to highlight the YES command and press ENTER.
The changes are saved and the module reboots.
5.7.2

Setting the Subnet Mask

If the management workstation that is to receive SNMP traps from the
2H22-08R and it is located on a separate subnet, the subnet mask for the
2H22-08R must be changed from its default.
To change the subnet mask from its default, perform the following steps:
1. Use the arrow keys to highlight the Subnet Mask field.
2. Enter the subnet mask into this field using Decimal Dotted Notation
(DDN) format.
For example: 255.255.255.0
Page 5-20
YES
Figure 5-10 Configuration Warning Screen
2H22-08R SmartSwitch 2208 User's Guide
WARNING!
NO
174252