Ethernet Interface Configuration - Cabletron Systems 2208 User Manual

Chapter 5: Local Management
5.11

ETHERNET INTERFACE CONFIGURATION

To access the Ethernet Interface Configuration Menu screen shown in
Figure 5-18 from the Device Configuration Menu screen, use the arrow
keys to highlight the ETHERNET INTERFACE CONFIGURATION
menu item, and press ENTER. The Ethernet Interface Configuration
screen displays.
Event Message Line
Device Type: 2H22-08R
Port
Port
Num
Type
1 FE-100TX
2 FE-100TX
3 FE-100TX
4 FE-100TX
5 FE-100TX
6 FE-100TX
7 FE-100FX
8 FE-100FX
SAVE
Figure 5-18 Ethernet Interface Configuration Screen
The following section briefly explains each field of the Ethernet Interface
Configuration screen:
Port Type (Read-Only)
Displays the type of physical media supported by ports 1 through 8.
Page 5-42
2H22-08R LOCAL MANAGEMENT
Ethernet Interface Configuration
Link Current
Status Oper. Mode
Link 100Base-TXFD
Link 10Base-TFD
100Base-TXFD
No Link
Link 100Base-TXFD
Link 100Base-TX
No Link 10Base-T
100Base-FXFD
Link
100Base-FX
Link
Flow Control Admin Status:
2H22-08R SmartSwitch 2208 User's Guide
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Desired
Oper. Mode
[Auto-Neg] [100Base-TXFD]
[100Base-TXFD] [100Base-TXFD]
[100Base-TXFD] [100Base-TXFD]
[100Base-TXFD] [100Base-TXFD]
[100Base-TXFD] [100Base-TXFD]
[100Base-TX] [100Base-TX]
[100Base-FXFD] N/A
[100Base-FX] N/A
[ Enabled ]
EXIT
XX.XX.XX
Advertised Ability
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
RETURN
2159-23