Broadcast Suppression Screen - Cabletron Systems Expansion module 6H122-08 User Manual

5.24

BROADCAST SUPPRESSION SCREEN

The Broadcast Suppression screen,
desired limit of receive broadcast frames per port per second.
The Broadcast Suppression screen may not be available if the
NOTE
operational mode of the module has been set to SECURE
FAST VLAN. Refer to your Release Notes to see what
operational modes support Broadcast Suppression. Refer to
Section 5.15.9
mode of the module.
Any broadcast frames received above the desired threshold will
be dropped.
Access the Broadcast Suppression screen from the Module Specific
Configuration screen by using the arrow keys to highlight the
BROADCAST SUPPRESSION menu item and pressing ENTER. The
Broadcast Suppression screen displays.
Event Message Line
Module Type: 6H122-08
Slot Number: X
PORT # Total RX
1 12345678910
2 12345678910
3 12345678910
4 12345678910
5 12345678910
6 12345678910
7 12345678910
8 12345678910
SAVE
Figure 5-30 Broadcast Suppression Screen
6H122-08 User's Guide
Figure
for instructions on configuring the operational
6H122-08 LOCAL MANAGEMENT
Broadcast Suppression
Peak Rate Time Since Peak
150000 999:23:59
150000 999:23:59
150000 999:23:59
150000 999:23:59
150000 999:23:59
150000 999:23:59
150000 999:23:59
150000 999:23:59
EXIT
Broadcast Suppression Screen
5-30, allows the user to set a
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Threshold Reset Peak
150000
150000
150000
150000
150000
150000
150000
150000
XX.XX.XX
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
RETURN
2159-25
5-81